Author Topic: Code is open-source?  (Read 2210 times)

SrMouraSilva

  • Newbie
  • *
  • Posts: 2
    • View Profile
Code is open-source?
« on: May 04, 2016, 04:34:06 PM »
Hello, first I would like to congratulate the creators of this project.

A rapid question. The code is open source?

Dave (drdashdot)

  • Administrator
  • Full Member
  • *****
  • Posts: 124
    • View Profile
Re: Code is open-source?
« Reply #1 on: May 06, 2016, 01:49:17 AM »

Thank you SrMouraSilva. 

The code is not open source at this time.  Maybe later, some will be, but there is some code used which will not. 

You're probably interested in how to use midi with the Zoom pedal?  If so, this program will not be very much use, since it only reads and loads the sysex message for a complete patch.  (That's the contents of the patch file stored on your computer. )
There is info available elsewhere on how to do more - for example, search in the gear page forum (thegearpage.net) for "Midi control of Zoom G3" (or something like that.)  There's some sample midi code there.

jrarmstro

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Code is open-source?
« Reply #2 on: February 18, 2018, 10:45:05 PM »
An old thread but it asks my exact question and I'm hoping the answer may have changed by now. Any chance this goes open source? I see it hasn't had any work in a couple years...

Dave (drdashdot)

  • Administrator
  • Full Member
  • *****
  • Posts: 124
    • View Profile
Re: Code is open-source?
« Reply #3 on: February 21, 2018, 04:03:34 PM »
Sorry, no change.  There is code mixed through it that I can't make public. 

aitzol

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Code is open-source?
« Reply #4 on: November 18, 2018, 06:06:31 AM »
Hello

Is there any documentation to learn how comunicate with the pedal?

I'm curious and want to learn

Thanks in advance